Tel:  +86-21-67276363   Email: info@sh-bangye.net
EnglishEnglish
海报1
Home » News » Technical Reference » International Standard For Pneumatic Fluid Power

International Standard For Pneumatic Fluid Power

Views:6     Author:Site Editor     Publish Time: 2018-06-12      Origin:Site

Part 1 :Cylinders

ISO 4393:2015

Fluid power systems and components -- Cylinders -- Basic series of piston strokes


ISO 4395:2009

Fluid power systems and components -- Cylinder piston rod end types and dimensions


ISO 4397:2011

Fluid power connectors and associated components -- Nominal outside diameters of tubes and nominal hose sizes


ISO 6537:1982

Pneumatic fluid power systems -- Cylinder barrels -- Requirements for non-ferrous metallic tubes


ISO 6432:2015

Pneumatic fluid power -- Single rod cylinders, 1 000 kPa (10 bar) series, bores from 8 mm to 25 mm -- Basic and mounting dimensions


ISO 15552:2004

Pneumatic fluid power -- Cylinders with detachable mountings, 1 000 kPa (10 bar) series, bores from 32 mm to 320 mm -- Basic, mounting and accessories dimensions


ISO 15524:2011

Pneumatic fluid power -- Cylinders -- Single-rod short-stroke cylinders, 1 000 kPa (10 bar) series, bores from 20 mm to 100 mm


ISO 21287:2004

Pneumatic fluid power -- Cylinders -- Compact cylinders, 1000 kPa (10 bar) series, bores from 20 mm to 100 mm


ISO 8139:2009

Pneumatic fluid power -- Cylinders, 1 000 kPa (10 bar) series -- Mounting dimensions of rod-end spherical eyes


ISO 8140:2009

Pneumatic fluid power -- Cylinders, 1 000 kPa (10 bar) series -- Mounting dimensions of rod-end clevises


ISO/TR 16806:2003

Pneumatic fluid power -- Cylinders -- Load capacity of pneumatic slides and their presentation method


ISO 10099:2001

Pneumatic fluid power -- Cylinders -- Final examination and acceptance criteria


 

Part 2: Valves


ISO 17082:2004

Pneumatic fluid power -- Valves -- Data to be included in supplier literature


ISO 12238:2001

Pneumatic fluid power -- Directional control valves -- Measurement of shifting time


ISO 20401:2005

Pneumatic fluid power systems -- Directional control valves -- Specification of pin assignment for electrical round connectors of diameters 8 mm and 12 mm


ISO 15218:2003

Pneumatic fluid power -- 3/2 solenoid valves -- Mounting interface surfaces


ISO 15407-1:2000

Pneumatic fluid power -- Five-port directional control valves, sizes 18 mm and 26 mm -- Part 1: Mounting interface surfaces without electrical connector


ISO 15407-2:2003

Pneumatic fluid power -- Five-port directional control valves, sizes 18 mm and 26 mm -- Part 2: Mounting interface surfaces with optional electrical connector


ISO 5599-1:2001

Pneumatic fluid power -- Five-port directional control valves -- Part 1: Mounting interface surfaces without electrical connector


ISO 5599-2:2001

Pneumatic fluid power -- Five-port directional control valves -- Part 2: Mounting interface surfaces with optional electrical connector


ISO 10041-1:2010

Pneumatic fluid power -- Electro-pneumatic continuous flow control valves -- Part 1: Main characteristics to include in the supplier's literature


ISO 10041-2:2010

Pneumatic fluid power -- Electro-pneumatic continuous flow control valves -- Part 2: Test methods to determine main characteristics to include in the supplier's literature


ISO 10094-1:2010

Pneumatic fluid power -- Electro-pneumatic pressure control valves -- Part 1: Main characteristics to include in the supplier's literature


ISO 10094-2:2010

Pneumatic fluid power -- Electro-pneumatic pressure control valves -- Part 2: Test methods to determine main characteristics to include in the supplier's literature

 


Part 3: FRL’s

ISO 6301-1:2009

Pneumatic fluid power -- Compressed-air lubricators -- Part 1: Main characteristics to be included in supplier's literature and product-marking requirements


ISO 6301-2:2006

Pneumatic fluid power -- Compressed-air lubricators -- Part 2: Test methods to determine the main characteristics to be included in supplier's literature


ISO 5782-1:1997

Pneumatic fluid power -- Compressed-air filters -- Part 1: Main characteristics to be included in suppliers' literature and product marking requirements


ISO 5782-2:1997

Pneumatic fluid power -- Compressed-air filters -- Part 2: Test methods to determine the main characteristics to be included in supplier's literature


ISO 6358-1:2013

Pneumatic fluid power -- Determination of flow-rate characteristics of components using compressible fluids -- Part 1: General rules and test methods for steady-state flow


ISO 6358-2:2013

Pneumatic fluid power -- Determination of flow-rate characteristics of components using compressible fluids -- Part 2: Alternative test methods


ISO 6358-3:2014

Pneumatic fluid power -- Determination of flow-rate characteristics of components using compressible fluids -- Part 3: Method for calculating steady-state flow-rate characteristics of systems


ISO 6953-1:2015

Pneumatic fluid power -- Compressed air pressure regulators and filter-regulators -- Part 1: Main characteristics to be included in literature from suppliers and product-marking requirements


ISO 6953-2:2015

Pneumatic fluid power -- Compressed air pressure regulators and filter-regulators -- Part 2: Test methods to determine the main characteristics to be included in literature from suppliers


ISO 6953-3:2012

Pneumatic fluid power -- Compressed air pressure regulators and filter-regulators -- Part3: Alternative test methods for measuring the flow-rate characteristics of pressure regulators

 

Part 4 :Overall

ISO 6099:2009

Fluid power systems and components -- Cylinders -- Identification code for mounting dimensions and mounting types


ISO 19973-1:2015

Pneumatic fluid power -- Assessment of component reliability by testing -- Part 1: General procedures


ISO 19973-2:2015

Pneumatic fluid power -- Assessment of component reliability by testing -- Part 2: Directional control valves


ISO 19973-3:2015

Pneumatic fluid power -- Assessment of component reliability by testing -- Part 3: Cylinders with piston rod


ISO 19973-4:2014

Pneumatic fluid power -- Assessment of component reliability by testing -- Part 4: Pressure regulators


ISO 19973-5:2015

Pneumatic fluid power -- Assessment of component reliability by testing -- Part 5: Non-return valves, shuttle valves, dual pressure valves (AND function), one-way adjustable flow control valves, quick-exhaust valves


ISO 8778:2003

Pneumatic fluid power -- Standard reference atmosphere


ISO 14743:2004

Pneumatic fluid power -- Push-in connectors for thermoplastic tubes


ISO 4414:2010

Pneumatic fluid power -- General rules and safety requirements for systems and their components


ISO 4399:1995

Fluid power systems and components -- Connectors and associated components -- Nominal pressures


ISO 6150:1988

Pneumatic fluid power -- Cylindrical quick-action couplings for maximum working pressures of 10 bar, 16 bar and 25 bar (1 MPa, 1,6 Mpa, and 2,5 MPa) -- Plug connecting dimensions, specifications, application guidelines and testing


ISO 11727:1999

Pneumatic fluid power -- Identification of ports and control mechanisms of control valves and other components


ISO 16030:2001

Pneumatic fluid power -- Connections -- Ports and stud ends 

ISO 3601-2:2008

Fluid power systems -- O-rings -- Part 2: Housing dimensions for general applications


ISO 1219-2:2012

Fluid power systems and components -- Graphical symbols and circuit diagrams -- Part 2: Circuit diagrams


ISO 6981:1992

Hydraulic fluid power -- Cylinders -- Rod end plain eyes -- Mounting dimensions


ISO 6022:2006

Hydraulic fluid power -- Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series


CONTACT BANGYE

QUICK LINK

CATEGORY

CONTACT INFO

 Tel: +86-21-67276363
 Fax: +86-21-67277272
 Email: info@sh-bangye.net
 Add: No.389 Langong Road,Jinshan Industrial Zone,Shanghai,China

SUBSCRIBE

Send Us Your Message
look forward to receiving your email and get back to you soon.
Copyright © Shanghai Bangye Pneumatic And Hydraulic Components Co.,Ltd All rights reserved.